installation orientation 0
The unit dimensions of the base pump (axial piston variable displacement pump A10VSO.../31) are contained in data sheet 92711.
Size 18 … 140
(Valve mounting direction "0"; shaft design "S”; without through-drive “N00”)
Dimensions in mm
(representation size 100)
Size | Dimensions with base pump variant "0479" or "0487" | Max. length | |||||||||
A1 | A31) | A4 | A5 | A6 | A6 I | A6 II | A8 I | A8 II | A8 III | A9 | |
mm | mm | mm | mm | mm | mm | mm | mm | mm | mm | mm | |
18 | 120 | 198 | 158 | 63 | 178 | 63 | 115 | 233 | 125 | 100 | 170 |
28 | 128 | 208 | 158 | 63 | 195 | 80 | 115 | 243 | 135 | 115 | 194 |
45 | 134 | 218 | 158 | 63 | 205 | 90 | 115 | 253 | 145 | 125 | 219 |
71 | 146 | 232 | 158 | 63 | 254 | 104 | 150 | 267 | 159 | 150 | 257 |
100 | 151 | 237 | 158 | 63 | 247 | 100 | 147 | 272 | 164 | 150 | 317 |
140 | 162 | 250 | 143 | 78 | 257 | 110 | 147 | 285 | 182 | 150 | 317 |
1) | Dimension with base pump “0000” design |
installation orientation 2
Size 18 … 140
(Valve mounting direction "2"; shaft design "S”; without through-drive “N00”)
Dimensions in mm
(representation size 100)
Size | Dimensions with base pump variant "0479" or "0487" | Max. length | |||||||||
A1 | A3 | A4 | A5 | A6 | A6 I | A6 II | A8 I | A8 II | A8 III | A9 | |
mm | mm | mm | mm | mm | mm | mm | mm | mm | mm | mm | |
18 | 100 | 116 | 158 | 63 | 178 | 63 | 115 | 151 | 125 | 100 | 253 |
28 | 108 | 127 | 158 | 63 | 195 | 80 | 115 | 162 | 135 | 115 | 263 |
45 | 114 | 137 | 158 | 63 | 205 | 90 | 115 | 172 | 145 | 125 | 278 |
71 | 126 | 151 | 158 | 63 | 254 | 104 | 150 | 186 | 159 | 150 | 306 |
100 | 131 | 156 | 158 | 63 | 247 | 100 | 147 | 191 | 164 | 150 | 373 |
140 | 142 | 180 | 143 | 78 | 257 | 110 | 147 | 215 | 182 | 150 | 373 |
Combination pumps
Attachment pump | Main pump | |||||||||||||||||||||||
A10VSO 18 | A10VSO 28 | A10VSO 45 | A10VSO 71 | A10VSO 100 | A10VSO 140 | |||||||||||||||||||
A1 | A2 | A3 | A4 | A1 | A2 | A3 | A4 | A1 | A2 | A3 | A4 | A1 | A2 | A3 | A4 | A1 | A2 | A3 | A4 | A1 | A2 | A3 | A4 | |
mm | mm | mm | mm | mm | mm | mm | mm | mm | mm | mm | mm | mm | mm | mm | mm | mm | mm | mm | mm | mm | mm | mm | mm | |
A10VSO 18 | 164 | 204 | 349 | 399 | 164 | 204 | 349 | 399 | 184 | 229 | 374 | 424 | 217 | 267 | 412 | 462 | 275 | 338 | 483 | 533 | 275 | 350 | 495 | 554 |
A10VSO 28 | 164 | 204 | 368.5 | 410 | 184 | 229 | 393.5 | 435 | 217 | 267 | 431.5 | 473 | 275 | 338 | 502.5 | 544 | 275 | 350 | 514 | 556 | ||||
A10VSO 45 | 184 | 229 | 413 | 453 | 217 | 267 | 451 | 491 | 275 | 338 | 522 | 562 | 275 | 350 | 534 | 574 | ||||||||
A10VSO 71 | 217 | 267 | 484 | 524 | 275 | 338 | 555 | 595 | 275 | 350 | 567 | 609 | ||||||||||||
A10VSO 100 | 275 | 338 | 613 | 664 | 275 | 350 | 625 | 679 | ||||||||||||||||
A10VSO 140 | 275 | 350 | 625 | 688 |
Ports
Size | 18 | 28 | 45 | 71 | 100 | 140 | ||
B: | Working line (SAE J518) 1) | |||||||
Size | 3/4" | 3/4" | 1" | 1" | 1 1/4" | 1 1/4" | ||
Mounting thread (DIN 13) | M10x1.5; 17 deep | M14x2; 19 deep | ||||||
Maximum pressure 2) | bar | 350 | ||||||
S: | Suction line (SAE J518) 1) | |||||||
Size | 1" | 1 1/4" | 1 1/2" | 2" | 2 1/2" | 2 1/2" | ||
Mounting thread (DIN 13) | M10x1.5; 17 deep | M12x1.75; 20 deep | M12x1.75; 17 deep | |||||
Maximum pressure 2) | bar | 10 |
1) | Dimensions according to SAEJ518 only, metric mounting thread deviating from the standard. |
2) | Application-specific short-time pressure peaks may occur. Please observe when selecting measuring devices and fittings. Specified pressures are in bar absolute. |
Notes regarding size 71:
With pressure connection “B” of size 71, two SAE mounting connections rotated by 90° are available. SAE 1 1/4″ standard pressure series, 207bar , for pressures up to 250bar or SAE 1″ standard pressure series, 344bar, for pressures up to 350bar. For operating pressures exceeding 250bar, the pressure flange SAE 1” must be used.
Dimensions in mm
Hubs for through-drives
Hubs for the combination of single pumps or the combination of SYDFE with other pumps. Observe that the attachment pump has a splined shaft SAE J744 with the specified diameter.
The following conditions apply to the attachment pumps listed in the table:
SYDFE and A10VSO with shaft S or R Internal gear pump PGH with shaft R, flange U2, see data sheet 10223 Internal gear pump PGF3 with shaft J, flange U2, see data sheet 10213 External gear pump AZPF with shaft R, front cover R, see data sheet 10089
Observe that the through-drive of the main pump and the flange of the attachment pump (see type key pump) are identical. Check in the current data sheet of the gear pump whether the shaft ends have the specified dimensions.
Main pump SYDFE or A10VSO... | Attachment pump | ||||||
Size 18 | Size 28 | Size 45 | Size 71 | Size 100 | Size 140 | Ø shaft | Pump type (examples) |
R902436099 | R902436199 | R902436100 | R902436200 | R902436201 | R902436202 | 3/4" 19-4 (SAE A-B) | SYDFE-2X, A10VSO..31 |
R902436098 | R902436084 | R902436083 | R902436101 | R902436102 | 7/8" 22-4 (SAE B) | SYDFE-2X, A10VSO..31 | |
R902436103 | R902436104 | R902436105 | R902436204 | 1" 25-4 (SAE B-B) | SYDFE-2X, A10VSO..31 | ||
R902436085 | R902436105 | R902436106 | 1 1/4" 32-4 (SAE C) | SYDFE-2X, A10VSO..31 | |||
R902436086 | R910943555 | 1 1/2" 38-4 (SAE C-C) | SYDFE-2X, A10VSO..31 | ||||
R910943565 | R910932172 | 1 3/4" 44-4 (SAE D) | SYDFE-2X, A10VSO..31 | ||||
R910943528 | R910986299 | R910943529 | R91094345 | R910943560 | R910943551 | 5/8" 16-4 (SAE A) | 1PF2G2, PGF2, PGH2, PGH3, AZPF |
Through-drives
KD3
Flange ISO 100, 2-hole for the attachment of
SYDFE.-2X (size 28 and size 45, flange A) A10VSO..31 (size 28 and size 45, flange A, see data sheet 92711)
Sectional presentation with examples for hubs (order number for hubs see hubs for through-drives)
Dimensions in mm
Size | A1 | A2 | A3 | A4 | A5 | A6 |
mm | mm | mm | mm | mm | ||
28 | 204 | 41.7 | 17.8 | - | - | M12; 15 right through |
45 | 229 | 41.7 | 17.9 | 46.7 | 18.4 | M12; 14 right through |
71 | 267 | 44.1 | 20.3 | 49.1 | 20.8 | M12; 20 deep |
100 | 338 | 41 | 17.6 | 45.9 | 18.2 | M12; 20 deep |
140 | 350 | 41.1 | 18 | 45.9 | 18.3 | M12; 20 deep |
KD5
Flange ISO 125, 2-hole for the attachment of
SYDFE.-2X (size 71 and size 100, flange A) A10VSO..31 (size 71 and size 100, flange A, see data sheet 92711)
Sectional presentation with examples for hubs (order number for hubs see hubs for through-drives)
Dimensions in mm
Size | A1 | A2 | A3 | A4 | A5 | A6 |
mm | mm | mm | mm | mm | ||
71 | 267 | 58.6 | 21.8 | - | - | M16; 20 right through |
100 | 338 | 56.4 | 19.5 | 63.9 | 7.9 | M16; 20 deep |
140 | 350 | 55.4 | 17.4 | 73.3 | 7.9 | M16; 20 deep |
KD7
Flange ISO 180, 4-hole for the attachment of
SYDFE.-2X (NG140, flange B) A10VSO..31 (NG140, flange B, see data sheet 92711)
Sectional presentation with examples for hubs (order number for hubs see hubs for through-drives)
Dimensions in mm
Size | A1 | A2 | A3 | A5 |
mm | mm | mm | ||
140 | 350 | 75 | 8 | M16; 22 right through |
KC1
Flange SAE 82-2 (SAE A, 2-hole) for the attachment of
SYDFE.-2X (size 18, flange C) A10VSO..31 (size 18, flange C, see data sheet 92711) PGF2 (shaft J, flange U2, see data sheet 10213) PGH2 and PGH3 (shaft R, flange U2, see data sheet 10223) AZPF (shaft R, front cover R, see data sheet 10089)
Sectional presentation with examples for hubs (order number for hubs see hubs for through-drives)
Dimensions in mm
Size | A1 | A2 | A3 | A4 |
mm | mm | mm | ||
18 | 182 | 40 | 43 | M10; 14.5 deep |
28 | 204 | 39 | 47 | M10; 16 deep |
45 | 229 | 40.5 | 53 | M10; 16 deep |
71 | 267 | 40 | 61 | M10; 20 deep |
100 | 338 | 40 | 65 | M10; 20 deep |
140 | 350 | 41 | 77 | M10; 17 deep |
KC3
Flange SAE 101-2 (SAE B, 2-hole) for the attachment of
SYDFE.-2X (size 28 and size 45, flange C) A10VO..31 (size 28 and size 45, flange C, see data sheet 92701) PGF3 (shaft J, flange U2, see data sheet 10213) PGH4 (shaft R, flange U2, see data sheet 10223)
Sectional presentation with examples for hubs (order number for hubs see hubs for through-drives)
Dimensions in mm
Size | A1 | A2 | A3 | A4 | A5 | A6 | A7 |
mm | mm | mm | mm | mm | mm | ||
28 | 204 | 43 | 16.5 | 47 | - | - | M12; 15 deep |
45 | 229 | 42 | 16.5 | 53 | 18.4 | 46.7 | M12; 18 deep |
71 | 267 | 43 | 16.5 | 61 | 20.8 | 49.1 | M12; 20 deep |
100 | 338 | 41 | 16.5 | 65 | 10.5 | 65 | M12; 20 deep |
140 | 350 | 44 | 16.5 | 77 | 18.3 | 45.9 | M12; 20 deep |
KC5
Flange SAE 127-2 (SAE C, 2-hole) for the attachment of
SYDFE.-2X (size 71 and size 100, flange C) A10VO..31 (size 71 and size 100, flange C, see data sheet 92701) PGH5 (shaft R, flange U2, see data sheet 10223)
Sectional presentation with examples for hubs (order number for hubs see hubs for through-drives)
Dimensions in mm
Size | A1 | A2 | A3 | A4 | A5 | A6 | A7 |
mm | mm | mm | mm | mm | mm | ||
71 | 267 | 55.5 | 17.9 | 61 | - | - | M16; 18 deep |
100 | 338 | 57 | 17.9 | 65 | 8 | 65 | M16; 25 deep |
140 | 350 | 60 | 17.9 | 77 | 9 | 77.3 | M16; 32 deep |
KC6
Flange SAE 152-4 (SAE D, 4-hole) for the attachment of
SYDFE.-2X (size 140, flange D) A10VO..31 (size 140, flange D, see data sheet 92701)
Sectional presentation with examples for hubs (order number for hubs see hubs for through-drives)
Dimensions in mm
Size | A1 | A3 | A4 | A5 |
mm | mm | mm | ||
140 | 350 | 10.5 | 77 | M16; 24 deep |